Ccna 3 final exam answers (2)

Text-only Preview

CCNAFinal.com CCNA 3 Final Exam Answers (2) 1. Refer to the exhibit. The network administrator needs to setup Switch1 for remote access from HostA. The show ip interface brief is issued on Router1 and the show interfaces trunk command is issued on the Switch1 to verify the current status. The administrator applies the additional configuration shown in the exhibit to Switch1. However, the telnet from HostA fails. What additional commands need to be applied to the switch? Switch(config)# interface vlan 1 Switch(config-if)# ip address 10.1.1.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 Switch(config)# interface vlan 1 Switch(config-if)# ip address 10.1.50.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.50.254 Switch(config)# interface vlan 10 Switch(config-if)# ip address 10.1.10.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 **Switch(config)# interface vlan 10 Switch(config-if)# ip address 10.1.1.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 Switch(config)# interface vlan 50 Switch(config-if)# ip address 10.1.10.250 255.255.255.0 Switch(config-if)# no shutdown Switch(config-if)# ip default-gateway 10.1.10.254 2. Refer to the exhibit. On the basis of the configuration shown, how will an Ethernet frame on port GigabitEthernet0/1 be modified? 802.1Q encapsulation prepends a 4-byte tag field in front of the original Ethernet frame and recomputes the frame check sequence (FCS) on the modified frame. **802.1Q encapsulation inserts a 4-byte tag field into the original Ethernet frame between the source address and type/length fields and recomputes the frame check sequence (FCS) on the modified frame. CCNAFinal.com CCNAFinal.com 802.1Q encapsulation prepends an 802.1p field in front of the original Ethernet frame and recomputes the frame check sequence (FCS) on the modified frame. 802.1Q encapsulation inserts an 802.1p field into the original Ethernet frame between the source address and type/length fields and recomputes the frame check sequence (FCS) on the modified frame. 3. What VLANs are allowed across a trunk when the range of allowed VLANs is set to the default value? **All VLANs will be allowed across the trunk. Only VLAN 1 will be allowed across the trunk. Only the native VLAN will be allowed across the trunk. The switches will negotiate via VTP which VLANs to allow across the trunk. 4. Which parameter is used to uniquely identify one wireless network from another? **SSID OFDM WEP DSSS 5. Refer to the exhibit. What is the consequence if SW1 port F0/1 is configured as an edge port? SW1 port F0/1 transitions to the learning state. **SW1 port F0/1 can generate a temporary loop. SW1 port F0/1 becomes a non-designated port. SW1 port F0/2 no longer passes BPDUs to SW4. Continue reading CCNA 3 Final Exam Answers (2) CCNAFinal.com CCNAFinal.com CCNAFinal.com Document Outline