Computer Building2

Text-only Preview

Computer Building & Upgrades
Custom PC buil
Is the computer not quick enough or too old?
Best PC builder
Maybe Then it's time to have an upgrade!
You may desire to build a new computer.
I am going to show you how you can build and/or upgrade your very own pc, at the fraction of what it
might cost to purchase a fully assembled system coming from a leading manufacturer.
I would like to develop suggestions as to to have the necessary parts to create your pc.
Catalog ordering is an extremely easy way get parts & accessories and in most cases they'll be friendly
knowledgeable people to advise you regarding your investment.
Just be certain you handle a professional business.
An execllent spot to go is the local computer show.
Many bargains can be found there especially when you buy with cash.
You can also look at computer & electronic stores.
Wherever you receive your laptop or computer parts & accessories, ensure you look around to get the
best deals and obtain the makers written warranties.
The tools you will require are 1 (one) Phillips and a couple of (two) Flathead non-magnetic screwdrivers.
Before starting I must explain how electronic circuits are static sensitive so there are some precautions
you must observe.
Keep circuit boards in their antistatic bags until they may be ready to be installed.
Before handling components discharge a mans static electric charge by touching a grounded surface.
The best way to make this happen is to plug your computer case into a power outlet and touch any
unpainted section of the metal.
When handling circuit boards.
Avoid touching any components for the boards and connectors that plug to the expansion slots.
Hold them by their edges and/or any metal mounting hardware for the circuit board.
Never slide boards over any surface as they are able sustain irreversible damage.
Avoid plastic, vinyl, Styrofoam, furs and carpet within your office.
You ought to wear a grounding wrist strap.
Make certain all components have reached 70 degrees.
There are a few varieties of compatible computers (often known as PC's).
These are the subsequent:
Older models referred to as AT socket 7, and newer ATX slot 1 type models.
The SOCKET 370 is yet another type which has similarities in features on the old socket 7 though speeds
more than 1 GHZ and beyond.
Be sure to obtain a case, power supply, motherboard and CPU which are works with one another.
Ask your profits person to be sure.
OPENING True.
If you are upgrading your current system produce a diagram with the associations at the back of it unit
in order to replace them correctly when you are finished.
Is actually a program must ground yourself by touching the unpainted metal chassis.
Then unplug the A/C electrical cord and any other cables which may be connected.
By looking at the back in the unit, locate approximately 6 screws around the outer edges and remove
them.