Effective Communication with Cisco Transceivers
Transceivers from Cisco are recommended products that enable clear and smooth signals for wireless communication.
The cisco xenpak model is the best option for data centers, enterprise wiring closets and transport applications as it
provides a wide range of 10 Gigabit Ethernet connectivity options for effective communication. This device is a hot
swappable input/output device which can be plugged into the Ethernet port of a Cisco switch or router which is linked to
the network. It is extremely flexible and provides a rich choice of interface. It supports the `pay- as-you-populate' model.
It also supports Cisco's quality identification feature that helps the Cisco router or switch in assessing whether it is a
certified and tested Cisco Xenpak model.
The GBIC transceiver model is based on the GBIC Multi Source Agreement. It is extremely compatible with the Gigabit
Ethernet and 1000Base-T Standards as specified in IEEE STD 802.32. The Copper GBIC transceivers use the GBIC's
RX_LOS pin for link indications with the 1000Base-X auto-negotiation function disabled on the host system. The CWDM
GBIC or Coarse Wavelength Division Multiplexing Gigabit Interface Converter is made up of two parts. One part has a set
of eight different pluggable transceivers and the other part contains a set of passive multiplexers.
The CWDM GBIC model can transmit up to eight channels of Gigabit Ethernet or Fiber Channels over single mode fiber
strands. This model does not require any configuration nor does it require any power. It supports the IEEE 802 3z
standard and can easily fit into any standard GBIC port. The multichannel architecture facilitates in building links for
availability and the two path link configurations in a ring architecture provides protection from fiber cuts.
The Cisco SFP or Small Form Factor Pluggable model consists of hot pluggable interfaces that provide a good choice of
protocols, reaches and speed options as well as supported transmission media. It is a hot-swappable input/output
device that can be plugged into an SPF port or into a Cisco router or switch slot. It links the port with the fiber optic
network. The SPF module can support both Gigabit Ethernet and Fiber Channel.
The transmission and reception signals have to be of high frequency to enable communication through radios, cordless
phones and wireless devices. Thus transceivers play an important part in effortless transmission of signals. Every
business needs good quality signals to operate without any interruptions. The choice of Cisco transceivers is a wise
decision that will bear beneficial results.
Know more on:
sfp-10g-sr Cisco Compatible
glc-sx-mm cisco compatible